GE ApexPro Manual page 27

User-level defaults (persistent)
2001989-301A- draft 1
Unless you are using the password protected CIC Pro center service mode, the
service-level defaults appear in light, dimmed text.
To configure the service-level defaults, see the CIC Pro Clinical Information Center
Bedrock Platform Service Manual.
In user mode, all of the controls are view-only. You must be in the Service mode to set
defaults. For more information, refer to CIC Pro Clinical Information Center Bedrock
Hardware Platform Service Manual.
Telemetry unit defaults
This option sets telemetry unit default settings. In user mode, all of the controls are
view-only. You must be in the Service mode to set the Telemetry Unit Defaults at the
CIC Pro center.
To view the telemetry unit default settings, click CIC Setup > Telemetry Unit
Defaults.
ApexPro™
System setup
502A
4-7