Honeywell V5004TF Installation Instructions Manual page 4

1
3
5
3.
Operating Control
To ensure that the valve is working in its operating differential
pressure range.
Measure the differential pressure across the valve as shown
in the picture below.
2.1 M5004
2.1.1Application
Electromotive actuators M5004 - 24V are used with many
kind of control systems used for HVAC applications, including
ON/OFF, floating, proportional managed by thermostat or
BMS handling analogue signals or PWM digital, of HVAC
2.1.2Dimensions
Overview
Dimensions in mm
2.1.3Approvals
• CE
Honeywell GmbH
1 Display
2 Button UP
3 Button MODE
4 Button DOWN
2
5 Manual override
4
GB
Provided the differential pressure is higher than the start up
pressure, the valve keeps flow constant at the set value.
4.
Maintenance and Cleaning
Use a damp cloth to clean the actuator.
Do not use any detergent or chemical product that may
seriously damage or compromise the function of the valve.
installations where V5004TF PICV balancing valves are
used; in order to properly set the presetting, see the specific
section devoted to actuator setting.
For further information about electrical connections, see the
specific section.
4 MU0H-2327GE23 R0618