Zipper Insertion; Inserting A Centered Zipper - AEG 63Z Instruction Manual

Manual for Model 63Z

Zipper insertion

This foot can be set to sew on each side of the zipper, the edge of the foot guides the
zipper to ensure straight placement.
01
1.0~3.0
2
3
4
5
1
3.5
4
5
Attention:
Zipper foot should be used for sewing
straight stitches only. It is possible that the
needle hits the presser foot and breaks
when sewing other patterns.

Inserting a centered zipper

- Place the right sides of the fabric
together. Sew a bottom seam 2cm from
the right edge of the zipper bottom stop
position. Sew a few stitches in reverse
to lock. Increase the stitch length to
maximum, set the tension below 2 and
baste the remaining length of the fabric.
- Press open the seam allowance. Place
the zipper face down on the seam
allowance with the teeth against the
seam line. Baste the zipper tape.
2cm
1
5mm
2
Reverse stitches
3
4 Basting stitching
5
Reverse side
- Attach the zipper foot. Attach the right
side of the presser foot pin to the holder
when sewing the left side of the zipper.
- Attach the left side of the presser foot
pin to the presser foot holder when
sewing the right side of the zipper.
49