AEG 63Z Instruction Manual page 32

Manual for Model 63Z
Operation buttons
8. Stitch width adjustment button
When you select a stitch the machine will
automatically set the recommended stitch
width (auto position).
If the pre-set stitch width needs adjusting
once the pattern is selected, push mode
button " " to move to the stitch width
position.
For a narrower stitch, press the "–" button.
For a wider stitch, press the "+" button. The
stitch width can be adjusted between "0.0-
7.0". Certain stitches have a limited stitch
width.
When the setting is at the auto position,
the number display will blink 3 times.
Selecting stitches
When MODE is set on stitch selection,
press stitch width adjustment buttons "+"
or "–" for unit position between 0~9.
30