Warning Function - AEG 63Z Instruction Manual

Manual for Model 63Z

Warning function

Warning beeping sound
- When operating correctly: 1 beep.
- When operating incorrectly: 3-short beeps.
- When the sewing machine is in trouble and can't sew: 3-short beeps.
It means that the thread is twisted or jammed and the hand wheel axle can't move. Please
look through the "Trouble shooting guide" to find the solution. When the problem is
solved the machine will continue sewing.
Please Note:
If the problem is still not solved, please contact your local dealer.
Attention:
During the sewing, if the thread get jammed inside the hook, stopping the needle from
moving, and you continue pressing the foot control, the security switch will stop the
machine completely. In order to restart the sewing machine, you have to turn the on/off
switch to the OFF position and then ON again.
Return bobbin winder spindle to left
If you press any button on the machine
when the bobbin is full or the bobbin
winder spindle is in the right position the
machine will beep 3 times as a warning.
Return the bobbin winder spindle to the
left position.
The sewing machine is in trouble
The animation message means that the
thread is twisted or jammed and the hand
wheel axle cannot move. Please look
through the "Trouble shooting guide" to
find the solution. When the problem is
solved the machine will continue sewing.
64