View The Phone Status - Cisco 7832 User Manual

Your Phone
• VLAN ID—VLAN ID of the phone.
• Addressing type—Indicates if the phone has DHCP or Static IP enabled.
• IP status—Status of IP that the phone uses.
• Subnet mask—Subnet mask used by the phone.
• Default router—Default router used by the phone.
• DNS 1—Primary Domain Name System (DNS) server that the phone uses.
• DNS 2—Optional Backup DNS server that the phone uses.
• MAC address—Unique Media Access Control (MAC) address of the phone.
• Host name—Displays the current host name assigned to the phone.
• Domain—Displays the network domain name of the phone. Default: cisco.com
• Switch port link—Status of the switch port.
• Switch port config—Indicates speed and duplex of the network port.

View the Phone Status

Procedure
Step 1
Press Settings softkey.
Step 2 Select Status > Phone Status.
You can view the following information:
• Elapsed time—Total time elapsed since the last reboot of the system
• Tx (Packets)—Transmitted packets from the phone.
• Rx (Packets)—Received packets from the phone.
View the Status Messages on the Phone
Procedure
Step 1 Press Settings softkey.
Step 2 Select Information and settings > Status > Status messages.
You can view a log of the various phone statuses since provisioning was last done.
Cisco IP Conference Phone 7832 Multiplatform Phone User Guide
Troubleshooting
15