Software Version; Legal Information; Showroom Programme - Miele H 7660 BP Operating And Installation Instructions

Settings
Running a RemoteUpdate
Information about the content and
scope of an update will be provided in
the Miele@mobile app.
A message will appear in your oven
display if a software update is available.
You can install the update immediately
or postpone this until later. When the
oven is switched on again, you will be
reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
– You will only receive a message when
an update is available.
– Once an update has been installed, it
cannot be undone.
– Do not switch the oven off during the
update. Otherwise, the update will be
aborted and will not be installed.
– Some software updates can only be
carried out by the Miele Customer
Service Department.
52

Software version

The software version is intended for the
Miele Customer Service Department.
You do not need this information for
domestic use.
 Confirm with OK.

Legal information

You can find an overview of the
integrated Open Source components
under Open source licences
 Confirm with OK.

Showroom programme

This function enables the oven to be
demonstrated in showrooms without
heating up. Do not activate this setting
for domestic use.
Demo mode
If you have demo mode activated,
Demo mode switched on. The appliance
will not heat up will appear when you
switch the oven on.
– On
Touch OK for at least 4 seconds to
activate demo mode.
– Off
Touch OK for at least 4 seconds to
deactivate demo mode. You can use
the oven as normal.
.