Miele H 7660 BP Operating And Installation Instructions page 122

Problem solving guide
Problem
Maximum operating hours
reached appears in the
display.

Fault F32 appears in
the display.

Fault F33 appears in
the display.
Fault and a fault code
not listed here appears
in the display.
Function currently not
available appears in the
display after selecting
the Descale function.
Fault with moisture control
the automatic programmes
will run without moisture
appears in the display
after selecting an
automatic programme.
Programmes using
moisture assistance are
not taking in water.
A noise can be heard
after a cooking
programme.
122
Cause and remedy
The oven has been operating for an unusually long
time. This has triggered the safety switch-off function.
 Confirm with OK.
The oven is now ready to use.
The door lock for pyrolytic cleaning has not locked.
 Switch the oven off and then back on again. Start
the pyrolytic cleaning programme again.
 If the message appears again, contact the Miele
Customer Service Department.
The door lock for pyrolytic cleaning has not opened.
 Switch the oven off and then back on again.
 If the door lock still does not deactivate itself,
contact the Miele Customer Service Department.
A fault has occurred that you cannot resolve.
 Call the Miele Customer Service Department.
The steam injection system is faulty.
 Call the Miele Customer Service Department.
The steam injection system is faulty.
 Call the Miele Customer Service Department.
Automatic programmes can be run without using
moisture assistance.
Demo mode is active. You can select menu options in
the display and the sensor controls, but the steam
injection system pump will not work.
 Deactivate demo mode by selecting
Showroom programme
The pump for the steam injection system is faulty.
 Call the Miele Customer Service Department.
The cooling fan remains switched on after a cooking
programme (see "Settings – Cooling fan run-on").
Settings
| |
Demo mode Off
|
.