Table of Contents
Advertisement
Access Control
VISTA-120 supports the capability with ADEMCO's
PassPoint Access Control System (ACS), PassPoint ACS
processes card reader information and controls the
locking and unlocking of doors. PassPoint also has
input zones and output relays/triggers. VISTA-120 can
incorporate uncommitted ACS zones as part of its
security system and can control uncommitted ACS
relays as if they were part of its own relay group.
VISTA-120 arming stations wired and wireless keypads
and RF keys and zones-can be used to control doors in
the ACS. Conversely, PassPoint access cards can
control relays, triggers, and X-10 AC mains signalled
devices in the VISTA-120 system. The arming status of
VISTA-120 partitions can control access through doors
in the PassPoint ACS.
If programmed and PassPoint is not used, VISTA-120
provides users with a command which activates a relay
for two seconds to open access doors (e.g. area door).
Each partition can be assigned one access control relay.
The VISTA-120 also has built in integrated access
control capabilities and can interface with up to 15
VistaKey modules (15 access points), which are used for
access control. Each VistaKey is a single-door access
control module that supports a proximity reader.
The VISTA-120 can store access control events in the
event log.
Up to 250 cardholders can be supported.
Voltage Triggers
Provides a trigger connector whose pins change state
for different conditions. Used with Long Range Radio
transmitters or other devices such as a voice dialler, a
derived channel STU, a remote keypad sounder,
keyswitch Armed and Ready LEDs.
Optional Keyswitch
Supports the ADEMCO 4146 keyswitch on any one of
the system's 8 partitions. If used, zone 7 is no longer
available as a protection zone.
In addition, supports one keyswitch per partition via
use of a serial number multiplex RPM (i.e. 4193SN)
with a double pole switch (key removable in both the
arm and disarm positions).
Event Log
Keeps a log of different event types (enabled in
programming) up to a total of 512 events.
•
Can be viewed at the keypad or through the use of
Compass upload software
•
Can be printed on a serial printer using a 4100SM
module as an interface to the control.
Section 1 - General Description
Scheduling
•
Open/Close schedules (for control of
arming/disarming and reporting)
•
Holiday schedules (allows different time periods for
Open/Close schedules)
•
Timed Events (activate relays, auto-
bypass/unbypass, auto-arm/disarm, etc.)
•
Access schedules (for limiting system access to
users by time and/or day)
•
End User Output Programming mode (provides 20
timers for relay control)
Audio Alarm Verification Option
Provides a programmable Audio Alarm Verification
(AAV) option that can be used in conjunction with an
output relay to permit voice dialogue between an
operator at the central station and a person at the
protected premises.
•
Requires the use of an optional AAV unit, such as
UVS/UVS-EU
•
If used, Zone 5 is no longer available as a protection
zone
Video Alarm Verification Option
Provides a programmable Video Alarm Verification
(VAV) option, which can be used in conjunction with an
output relay to permit video imagery of the protected
premises using standard telephone lines.
Requires the use of a Video Transmitter and associated
Video Receiver.
Cross-Zoning Capability
Helps prevent false alarms by preventing a zone from
going into alarm unless its linked zone is also faulted
within five minutes.
Exit Error False Alarm Prevention Feature
•
System can tell the difference between a regular
alarm and an alarm caused by leaving an
Entry/Exit door open. If not subsequently
disarmed, faulted E/E zone(s) will be bypassed and
the system will arm
•
Generates an "Exit Error" report by user and by
zone so the Central Station knows it was an exit
alarm and who caused it
Improved Downloading Speed
Uploads and downloads at 300 baud (predecessor
control rate is 75 baud), making upload/download speed
approximately four times faster.
Communication Formats
Supports the following formats for the Primary and
Secondary Central Station receivers:
•
ADEMCO Low Speed (Standard or Expanded)
•
Sescoa/Radionics
•
ADEMCO Express
•
ADEMCO Expanded High Speed
•
ADEMCO Contact ID
•
Robofon Contact ID
1-3
Hide quick links:
Advertisement
Table of Contents
