Cisco MX300G2 Manual page 5

In-room controls
Table of contents
Introduction Introduction
Create a user interface
API for in-room control
Widgets
Command reference
Troubleshooting
You can customize our Touch 10 user interface to allow control of peripherals in
Tips and tricks
a meeting room, for example lights and blinds.
Examples
D15358.01 APRIL 2016
Collaboration Endpoint software
version 8.1
© 2016 Cisco Systems, Inc.
All rights reserved.
Example of an in-room control panel on Touch 10
You need a Cisco video system with a Touch 10 user interface, and a third-
In-room control icon
party control system, for example Crestron, AMX, Apple HomeKit, or Android.
(entry icon)
The video system's API, referred to as the xAPI, is the link between the video
system and the control system. Use the events and commands exposed by the
xAPI when you program the control system.
In-room control panel
The simple drag-and-drop in-room control editor offers a library of user
interface elements, referred to as widgets. You can use these widgets to create
your own in-room control panel for the Touch 10 user interface.
Together, all of this allows for the powerful combination of the control system's
functionality and the user-friendly Touch 10 user interface.
Touch 10
5
Blinds
xAPI
Video system Control system
In-room
control
editor
Other...
In-room control schematics
Climate
Lights