Statuses
Table of contents
Introduction
UserInterface Extensions Widget [n] WidgetId
UserInterface Extensions Widget [n] Value
Create a user interface
This status returns the identifier (WidgetId) and the current value of the widgets.
The value is an empty string until a value is set by using the UserInterface
Extensions Widget SetValue command.
API for in-room control
USAGE:
Widgets
xStatus UserInterface Extensions
Value space of the result returned:
Value: The value of the widget. Depends on widget type. String (0, 255)
Command reference
Command reference
WidgetId: The unique widget identifier. String (0, 40).
Example:
Troubleshooting
xstatus UserInterface Extensions
*s UserInterface Extensions Widget 1 Value: "on"
Tips and tricks
*s UserInterface Extensions Widget 1 WidgetId: "togglebutton"
*s UserInterface Extensions Widget 2 Value: "255"
*s UserInterface Extensions Widget 2 WidgetId: "slider"
Examples
*s UserInterface Extensions Widget 3 Value: "Blinds"
*s UserInterface Extensions Widget 3 WidgetId: "spinner"
*s UserInterface Extensions Widget 4 Value: "inactive"
*s UserInterface Extensions Widget 4 WidgetId: "button"
*s UserInterface Extensions Widget 5 Value: "2"
*s UserInterface Extensions Widget 5 WidgetId: "groupbutton"
*s UserInterface Extensions Widget 6 Value: "Projector is ready"
*s UserInterface Extensions Widget 6 WidgetId: "textfield"
** end
D15358.01 APRIL 2016
Collaboration Endpoint software
version 8.1
© 2016 Cisco Systems, Inc.
All rights reserved.
33