Cisco MX300G2 Manual page 42

Control of lights
Table of contents
The combination of a slider and a toggle button could be used to control lights.
The toggle button switches the lights on or off; the slider serves as a dimmer.
Introduction
Create a user interface
API for in-room control
Widgets
Command reference
Troubleshooting
Tips and tricks
Examples Examples
Group button with three mutually exclusive options
Consider the following strategy:
• Set the slider to minimum when the user turns the lights off.
• Set the toggle button to off when the user moves the slider to its minimum.
• Remember the value of the slider when the lights are turned off, so that you
can return to this value when the lights are turned back on again.
If the light is at 40 %, when the user switches it off, he or she would expect it
to go back to 40 % (not maximum) when switching the lights on again.
• When the user selects one of the options in the group button (a light preset),
set the sliders and toggle buttons accordingly.
D15358.01 APRIL 2016
• If the lights are changed away from a preset, for instance by changing a
Collaboration Endpoint software
slider or toggle button, unselect all options in the group button.
version 8.1
© 2016 Cisco Systems, Inc.
All rights reserved.
Combination of slider and toggle button
Control of temperature
The combination of a spinner and a large font text box (value) may be used to
control temperature. Use the spinner to set the desired temperature, and the
large font text box to show the current temperature.
A spinner with text between the up and down arrows
For the best user experience remember the following:
• Update the large font text box as the temperature in the room changes.
• Update the text field of the spinner when someone tap the up and down
arrows.
Consult the Widgets chapter for details about how to update the spinner's text
field and the large font text box.
42
Large font text box