Cisco MX300G2 Manual page 25

Button with symbol
Table of contents

Introduction
Example of use: Controls for a media player, or other devices that can start,
Create a user interface
stop, pause.
API for in-room control
Events
Widgets Widgets
Pressed
Command reference
Released
Clicked
Troubleshooting
Tips and tricks
Examples
Commands
Use the
D15358.01 APRIL 2016
A value of
Collaboration Endpoint software
version 8.1
release it.
© 2016 Cisco Systems, Inc.
All rights reserved.
     
inactive
Triggered when the button is pressed
Value: N/A
Triggered when the button is released
Value: N/A
Triggered when the button is released
Value: N/A
command to highlight or not the button in the user interface.
SetValue
will highlight the button, and a value of
"active"
    
There are buttons with different symbols under the Icons tab in the library. Such
a button has similar behavior as a button with custom text.
active
A button has two states: active and inactive. You do not have to set the button in
active state when someone taps it; the button can be used to just send a signal
without changing its visual state.
Example:
*e UserInterface Extensions Event Pressed Signal: "symbol"
** end
*e UserInterface Extensions Event Released Signal: "symbol"
** end
*e UserInterface Extensions Event Clicked Signal: "symbol"
** end
.
.
.
<Event>
<UserInterface item="1">
</UserInterface>
</Event>
Example:
xCommand UserInterface Extensions Widget SetValue WidgetId: "symbol"
will
"inactive"
25
Press and release the button with WidgetId = "symbol".
Terminal mode
XML mode
<Extensions item="1">
<Widget item="1">
<Action item="1">
<WidgetId item="1">symbol</WidgetId>
<Value item="1"></Value>
<Type item="1">clicked</Type>
</Action>
</Widget>
</Extensions>
Highlight the button with WidgetId = "symbol" (set it in active state)
Value: "active"