SPECIFICATIONS
Model:
Blade diameter
Hole diameter
Max. kerf thickness of the saw blade
Max. miter angle
Max. bevel angle
No load speed (RPM)
Laser type
Rated voltage
Dimensions (L x W x H)
Net weight
Cutting capacities (H x W)
0°
Thickness of wood
facing on guide
fence for increased
45° (right and left)
Thickness of wood
facing on guide
fence for increased
60° (right and left)
Thickness of wood
facing on guide
fence for increased
Cutting capacities for special cuttings
Type of cutting
Crown molding 45° type
(with crown molding stopper used)
Base board
(with horizontal vise used)
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
European countries
Countries other than Europe
European countries
Countries other than Europe
Miter angle
-
20 mm
38 mm
height of cut
-
15 mm
25 mm
height of cut
-
15 mm
25 mm
height of cut
DLS211
30 mm or 25.4 mm (country specific)
Red Laser 650 nm, Maximum output
898 mm x 690 mm x 725 mm
45° (left)
61 mm x 382 mm
71 mm x 363mm
78 mm × 325 mm
80 mm × 292 mm
61 mm x 268 mm
71 mm x 255 mm
-
-
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
2 ENGLISH
DLS212
305 mm
305 mm
30 mm
3.2 mm
Right 60°, Left 60°
Right 48°, Left 48°
-1
4,400 min
1.6mW ( Laser Class 2M )
D.C. 36 V
30.2 - 30.8 kg
Bevel angle
0°
45° (right)
92 mm x 382 mm
44 mm x 382 mm
107 mm x 363 mm
54 mm x 363 mm
115 mm × 325mm
61 mm × 325 mm
120 mm × 292 mm
92 mm x 268 mm
44 mm x 268 mm
107 mm x 255 mm
54 mm x 255 mm
115 mm × 227 mm
120 mm × 212 mm
92 mm x 185 mm
107 mm x 178 mm
115 mm × 155 mm
120 mm × 140 mm
Cutting capacity
203 mm
171 mm
-
-
-