Advertisement
SECTION
XIX
Configuring New DN66l6/6624/6632
(DN6600-l)
DCF6014
Same as DCF6013 but includes ACU support for one
line. ACU support requires NPS. ACU occupies
space equal to a quarter board LIU,
thus counts
as an LIU in limit of 1-4 LIUs per GPCB.
DCF6015
Terminates 1 line at up to 9,600 bits per second.
For BSC link protocol with use of CRC (Cyclic
redundancy check).
CRC hardware
included
in
DCF6015.
EIA RSZ32C interface. ASCII or EBCDIC
code, transparent or non-transparent mode. HDX or
FDX.
DCF6016
Terminates 1 line at up to 56,000 bits per
second.
HDX or FDX.
DCF60l9
Terminates 1 line up to 9,600 bits per second.
-
Honeywell logical HDLC link protocol. Software
support via NPS NT2 and DPl(DPS), and GRTS-II,
lQ79. Any code. Bit-oriented protocol.
EIA R8232C
interface.
HDX or FDX.
DCF6050
Terminates 1 line at up to 9,600 bits per second.
Honeywell logical HDLC link protocol.
Software
support via NPS NT2 and DPl(DPS), and GRTS-II,
lQ79.
Any code. Bit—oriented protocol. Military
standard 188C interface.
DCF6053
Same as DCF6019,
for Honeywell logical HDLC link
protocol, but includes ACU support. ACU support
requires NPS.
HDLC software support by NPS NT2
and DPI
(DPS), and GRTS-II,
lQ79.
ACU occupies
space equal to a quarter board LIU,
thus counts
as an LIU in limit of 1-4 LIUs per GPCB.
DCF6054
Terminates 1 line at up to 56,000 bits per
second,
wideband
line.
Honeywell
logical
HDLC
link protocol. Software support via NPS NT2 and
DPl(DPS), and GRTS-II,
lQ79.
DCF6055
Terminates 1 line at up to 56,000 bits per
second, wideband line. BSC link protocol.
CRC Cyclic Redundancy Check hardware included.
ASCII or EDCDIC code, transparent or
non-transparent mode.
HDX or
FDX.
DCF6058
Terminates 1 line at up to 56,000 bits per
second. Honeywell logical HDLC link protocol. HDX
or FDX.
HDLC software support via NPS NT2 or
188
DH92.
Rev.
0
Advertisement
