Advertisement
DCMGGGB
3.
DCK6603
DCK6601
DCK66Z2
DCF6041
DCF6043
SECTION XIX
Configuring New DN66l6/6624/6632
(DN6600—l)
Extension or second upgrade on-site to raise FNP
from 64KW/128KB to 128KW/256KB. Cannot be
installed without DCMGGQZ.
Capability Upgrades
(See also XVIII.H)
Upgrade new DCP6616 on-site to standard
capability of new DCP6624.
DCF6043 must also be
ordered.
Upgrade on-site from new DCP6624 having 24KW/48KB
memory to 32KW/64KB and.with full capability
content of standard new DCP6632.
Can also be
applied to DCP6616 with DCK6603 as prerequisite.
For new DCP6624 or new DCP6616, both with DCMGGGI
as prerequisite.
If DCP6616,
DCK6603 also a
prerequisite. Upgrade on—site to full capability
content of standard new DCP6632.
DIA
(direct interface adapter)
for DCP6624 or
DCP6632.
Provides link to a second Level 66 IOM
or second IOM physical channel.
Price includes
IOM channel. Remember that each FNP includes one
DIA on standard basis.
Use of DCF6fl4l provides a
backup connection to Level 66,
effective only
after a warm start following malfunction of
standard DIA.
PSA
(peripheral subsystem interface adapter)
for
DCP6616.
Provides a termination point for the
physical channel connection from MSP.
Required
if NPS is used. Can also be used to provide a
second PSA for DN6632.
No NPS support of 2 PSAs
concurrently. New NPS bootload required.
See
Section XII.K.
4.
GPCB Synchronous-only LIUs
DCF6Q13
Terminates 2 lines at up to 9,66% bits per second
each.
Each line can run at different speed.
EIA
RSZ32C interface. ASCII code.
HDX or FDX.
For
Honeywell VIP,
RCIW
MMI
link protocols and
various others.
Lines can run at different
speeds.
187
DH92.
Rev.
E
Advertisement
