Honeywell 66 Configuration Manuals page 143

SECTION XVI
Configuring Manual Peripheral Switch Subsystems
Example 2 - to switch a device processor between two
physical IOM PSI channels. Could use, for example, to
switch an MTP between two physical IOM PSI channels.
The reverse appproach could also be used, i.e.,
to select one of two device processors to connect to
an IOM PSI channel. Since only one IOM channel is
required, and one each would have been included in
the prices of the device processors, P800201 would be
the lower priced approach. PSUQZfll price does not
include an IOM channel, which would be superfluous in
this case.
Memory Memory
May be on same
IOM in same sys-
a a tem or in differ-
ent systems. One
IOM channel comes
with the device
. processor, one
PSU ° '
with PSF0511
0200
f
P3170511
which is included
in PSUOZOO price
a
Device
Processor aInterfaces included in each
switch unit
Device(s)
138 DH92. Rev. 0