Setting Up The Dolphin Terminal - Honeywell Dolphin 6110 User Manual

Software Requirements for Communication
To sync successfully, ActiveSync must be configured for the same communication type on both the host
workstation and the Dolphin terminal. ActiveSync must be setup on your workstation before you initiate
synchronization from the terminal for the first time.
Setting Up the Host Workstation
Verify that ActiveSync is configured to use the appropriate communication type by clicking File >
Connection Settings
For USB communication, check Allow USB connections.

Setting Up the Dolphin Terminal

The Dolphin terminal defaults to USB communication out of the box. To verify and/or change the default
setting, tap Start > Settings > Control Panel > PC Connection.
Must be checked to connect to a workstation
Displays the current connection setting
Tap Change Connection to change the current settings.
Connection Options
'USB
6-4
Select this option to ...
Establish a USB connection.
Tap to change the connection settings