Honeywell Dolphin 6110 User Manual page 20

Stylus
Dolphin 6110 terminals ship with a stylus inserted in a loop on the hand strap. Store the stylus in
the hand strap when you're not using it; see
Installing Memory Cards
Note: Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD or microSDHC memory
cards with Dolphin terminals for maximum performance and durability. Only memory cards purchased directly
from Honeywell are supported. Contact a Honeywell sales representative for additional information on
qualified memory card options.
To install an SD card:
1. Open the access door on the left side.
2. Insert the SD card with the label facing upward.
Note: To remove an installed SD card while the access door is open, tap on the edge lightly to unlock the card; the
card pops out just enough for you to grab its edge and to pull it out.
3. Replace the access door.
Using the Stylus on page 2-5.
3-9