8.
Align the protrusions on the shear blades vertically
at the same position.
► 1 . Protrusion
9.
Attach the felt pad to the shear blades.
► 1 . Felt pad
10. Insert the protrusion on the shear blades to the
hole on the rod, then align the position of the felt pad
with the holes on the tool, and then attach new sleeves
and washers.
1
1
2
1
► 1 . Protrusion 2. Hole 3. Felt pad 4. Washer
5. Sleeve
NOTICE:
inner periphery of the hole of the rod.
NOTICE:
the sleeves.
11.
Align the holes on the shear blades with the holes
on the tool, and then tighten 2 screws to fix the shear
blades.
► 1 . Screw 2. Hole
10 ENGLISH
3
4
5
Apply a small amount of grease to the
Be careful not to lose the washers and
1
1
2