Sharp MD-X8 Operation Manual page 56

(Continued)
When an error message is displayed, proceed as follows:
Error messages Meaning
BLANK MD • Nothing is recorded.
Can't ACCESS • The unit cannot access the personal computer.
• While MD 0 MDEDIT, incorrect digital signals are input
from the portable MD.
Can't COPY • No copy can be made because of the SCMS copyright system. • Record using the analog cable.
Can't EDIT • A track cannot be edited.
Can't REC • Recording cannot be performed correctly due to vibration.
DEFECT • Since this disc has scratches on it, the recording operation
was skipped.
CH ERROR • The CD changer doesn't work well.
CONNECT ERR • While MD 0MD EDIT, incorrect digital signals are input
from the
Din UNLOCK • Incorrect digital signals are input.
DISC ERR* • The disc is damaged.
• The TOC information is not recorded on the disc.
DISC FULL • The disc is out of recording space.
EDIT OVER • There is no space left for recording CD.
FOCUS ERROR • A disc has not been loaded.
• The disc data cannot be read.
MD ERROR • Trouble is found.
MECHA ERR* • There is a mechanical problem and the disc is not working
properly.
NAME FULL • The number of characters for the disc name or track name
exceeds 40.
NO DISC • A MiniDisc has not been loaded.
• MiniDisc data cannot be read.
NOT AUDIO • The data recorded on this disc is not audio data.
PLAYBACK MD • You tried to record on a playback-only disc.
• The disc and track names cannot be moved on playback discs. • Edit only the sound.
PROTECT • Trouble is found.
PROTECTED • The MiniDisc is write protected.
TEMP OVER • The temperature is too high.
TOC ERR* • The disc has a large amount of damage.
TOC FULL* • There is no space left for recording character information
(track names, disc names, etc.).
TOC W ERROR • Trouble is found.
TRAY ERROR • The disc tray for CD doesn't work well.
U TOC ERR* • The TOC information on this disc does not meet the MD
specifications or it cannot be read.
U TOC W ERR • The TOC information could not be created properly due to
a mechanical shock or to scratches on the disc.
? DISC • The data contains an error.
00:00 • Music is not recorded.
* Number or symbol
38-58
portable MD player.
55
Remedy
• Replace the disc with a recorded disc.
• Make sure the sound card is plugged in correctly.
• Make sure the personal computer is operating normally.
• Make sure the cable is connected correctly and the portable MDs power
is on.
• Change the stop position of the track and then try editing it.
• Rerecord or replace it.
• Replace the disc with another recordable disc.
• Turn off the power, and disconnect the AC power cord from
the AC outlet.Then connect the AC power cord, and turn on the power again.
• Make sure the cable is connected correctly and the portable
MD turns on the power.
• Connect correct digital signals.
• Use the analog input jack.
• Reload the disc or replace it.
• Replace the disc with another recordable disc.
• Replace it with another recordable disc.
• Reload the MiniDisc.
• Contact a Sharp Authorized Servicing Dealer or Sharp
Authorized Service station.
• Turn off the power, and press the 7 button.
• Shorten the disc or track name.
• Load a MiniDisc.
• Reload the MiniDisc.
• Select another track.
• Replace the MiniDisc.
• Replace it with a recordable MiniDisc.
• Restart the unit. If the unit doesn't work, contact a Sharp
Authorized Servicing Dearer or Sharp Authorized Service station.
• Move the write protection tab back to its original position.
• Turn off the power, and wait for a while.
• Replace the disc with another disc.
• Replace it with another recordable disc.
• Contact a Sharp Authorized Servicing Dealer or Sharp
Authorized Service station.
• Turn off the power, and disconnect the AC power cord from
the AC outlet. Then connect the AC power cord, and turn on
the power again.
• Replace it with another disc.
• Erase all the data, and try recording.
• Turn off the power, and try to write the TOC again.
(Remove any source of shock or vibration while writing.)
• Replace the disc with another disc.
• Replace the disc with a recorded disc.
55
98.6.23, 10:34 AM