Sharp MD-X8 Operation Manual page 35

(Continued)
NAME/
TOC EDIT
MD
Move
1
M D
2
M O V E
3
M O V E
4
(To move it to the fifth track position)
C O M P L E T E
5
Programmed move
P R O G R A M
2
P R O
3
4
*27-37
MULTI CONTROL
ENTER
8 5 : 2 8
(To move the eight track)
8 1 O K ?
E N T E R
8 5 O K ?
E N T E R
M O V E
G R A M M O V E O K ?
E N T E R
C O M P L E T E
34
H H H H H Move
1
While in the stop mode, select the track you wish to move
using the multicontrol button.
Or start playing the track to be moved, and then press the MD
06 button.
I The unit will enter the pause mode.
2
Press the NAME/TOC EDIT button, and then select "MOVE"
using the MULTI CONTROL button.
3
Within 10 seconds, press the ENTER button.
4
Select the direction to move the track using the MULTI
CONTROL button.
I To increase the track number ...
I To decrease the track number ...
I To cancel the operation, press the MD H button.
5
Press the ENTER button again.
I The track is moved, and the unit is stopped at the beginning of the
track.
Note:
I When a track has been moved, the other tracks which are affected will
be assigned new track numbers automatically.
Example:
When moving the fifth track to the third track, the old third track
will become the new fourth track, and the old fourth track will
become the new fifth track.
I This function cannot be used while in the program ( "PRGM" is lit) or
the random play modes ( "RANDOM" is lit) . First, cancel the program
or random play modes before trying to use this function.
Programmed move
1
Select the tracks you want to move and enter them into a
program. (Page 23)
2
Make sure that the "PRGM" indicator is lit, and then press the
NAME/TOC EDIT button.
3
Within 10 seconds, press the ENTER button.
I To cancel the operation, press the MD H button.
4
Press the ENTER button again.
I The tracks will be moved, and the programmed move mode will end.
Notes:
I The track numbers that are not included in the programmed selections
will be put at the end of the new sequence.
I When the same track has been entered into the program twice or
more, the last programmed position will have priority.
34
98.6.23, 10:32 AM