Event Log Navigation - Honeywell BW Solo User Manual

Honeywell BW Solo User Manual

8.1. Event Log Navigation

Note: The Event Log is not present in the Information navigation for BW Solo monitors sold in North
America.
The Event Log consists of a listing of events that have been captured.
To enter the Event Log from the Information menu, hold the button down for 1 second at the ">Event Log"
prompt. There are three screens for each event, shown automatically in sequence from the date of the
event to the start of the event to the conclusion of the event. It also shows the reading and the type of
alarm (Low, High, etc.).
When there are multiple events in the Event Log, the screens cycle through a single event until you press
the button. Each time you press the button, the next event is shown. When all events have been shown,
the "<Exit" prompt is shown. To exit, hold the button for 1 second, and when the ">Event Log" prompt is
shown, click the button once to exit to the next screen in the Information sequence, Serial Number.
24