Out-Of-Box Experience (First Time Use Only) - Honeywell BW Solo User Manual

3.1. Out-Of-Box Experience (First Time Use Only)

The first time the instrument is turned on, you are prompted to select a display language and to
enter time and date.
Note: Language selection during the first power-on is mandatory.
Note: If you do not press a button for 6 seconds during out-of-the-box power-on, the instrument
automatically turns off. Language selection during the first power-on is mandatory, although you
can skip the time and date. If a language was selected before this 6-second idle period, the
instrument shows the normal reading screen after the next start-up. If a language has not been
selected, then the next time the instrument is turned on, there is a prompt to select a language.
Press and hold the button for 3 seconds. When you power the unit on, it counts down, 3-2-1. LEDs
flash, the vibration alarm shakes, and the audible alarm sounds, and the Honeywell logo then
appears on the screen. After startup, the "Set language" screen is shown.
Step through the available languages by pressing the button. Once you see the language you want,
press and hold the button for 1 second.
Note: If you pass the language you want, press the button until your language is shown. Then
press and hold the button for 1 second.
Once you have set the language, wait 3 seconds, and the "Set time" screen is shown.
Press and hold the button for 1 second to set the time. Otherwise, press it once to change to "No."
Then press the button for 1 second to advance to "Set date." If you change your mind and want to
set the time, press the button once instead.
Set the hour (00 to 23) by pressing the button until you reach the correct hour. Once the hour is
selected, press and hold the button for 1 second.
When "Set minute" is shown, press the button repeatedly to reach the correct minute (00 through
59). Then press and hold the button for 1 second. The time is now set.
If a major error that prevents the instrument from functioning is found during startup, an error
number is shown on the display. Shut off the instrument and restart it. If the error message is
shown again, shut off the instrument and contact Technical Services.
Honeywell BW Solo User Manual
IMPORTANT!
11