Turn The Leds On Or Off - NETGEAR EX7000 User Manual

10. Click the Upload button.
The firmware update starts and the extender restarts. The firmware update process takes
a couple of minutes.

Turn the LEDs On or Off

If you turn the LEDs off, the Power LED remains on.
To turn the LEDs on or off:

1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter http://mywifiext.local in the
address field of the browser.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
- Windows-based computer. http://mywifiext or http://mywifiext.local
- Mac computers, iOS devices, and Linux devices. http://mywifiext.local
- Android devices. http://<extender's IP address> (for example, http://192.168.1.3)
For information about how to find the extender's IP address, see
IP Address
A login page displays.
3. Enter your admin email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > LED On/Off.
The LED On/Off page displays.
6. Select the OFF or ON radio button.
• To turn the LEDs on, select the ON radio button.
• To turn the LED off, select the OFF radio button.
7. Click the SAVE button.
Your settings are saved.
AC1900 Nighthawk WiF Mesh Extender
on page 69.
.
Maintain and Monitor the Extender
46
Find Extender's