Set Up An Access Schedule - NETGEAR EX7000 User Manual

using the network configuration utilities of the computer. You might also find the MAC
addresses on the Connected Devices screen (see
To use WiFi access control to deny access:

1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter http://mywifiext.local in the
address field of the browser.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
- Windows-based computer. http://mywifiext or http://mywifiext.local
- Mac computers, iOS devices, and Linux devices. http://mywifiext.local
- Android devices. http://<extender's IP address> (for example, http://192.168.1.3)
For information about how to find the extender's IP address, see
IP Address
A login page displays.
3. Enter your admin email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Connected Devices.
The Connected Devices page displays.
6. In the WiFi Devices section, select the Enable Access Control check box.
The WiFi devices table displays the name and MAC address of WiFi devices that are
connected to the extender.
7. Select the Deny check box for the device.
8. Click the SAVE button.
Your settings are saved and that device cannot connect to the extender's WiFi network.

Set Up an Access Schedule

You can control access to all users during specific periods of the day. You can set up an
access schedule that prevents Internet access through the extender network based on the
times that you set.
AC1900 Nighthawk WiF Mesh Extender
on page 69.
.
Extender Network Settings
32
View Connected Devices on page 25).
Find Extender's