GE AF-600 FP Operating Instructions Manual page 32

About Drive Programming
5. F-52 Minimum Reference. Set minimum internal
drive reference to 0Hz. (This sets the minimum
drive speed at 0Hz.)
6. F-53 Maximum Reference. Set maximum internal
drive reference to 60Hz. (This sets the maximum
drive speed at 60Hz. Note that 50/60Hz is a
regional variation.)
7. Press [Back] twice to return to Parameter Data Set
and scroll to Analog In/Out
AF-600 FP Operating Instructions
8.
9.
10.
Analog Input 53
AN-10 Terminal 53 Low Voltage. Set minimum
external voltage reference on Terminal 53 at 0V.
(This sets the minimum input signal at 0V.)
AN-11 Terminal 53 High Voltage. Set maximum
external voltage reference on Terminal 53 at 10V.
(This sets the maximum input signal at 10V.)
5 5
29