Tracker - Honeywell GMPT-401-C1D2 User Manual

Chapter 3 — Operation
30
5 Confirm that you want to update the tracker settings by touching Send in the
popup window. The settings will be sent to ViewPoint or the tracking
application at the next reporting interval.
Alert Configuration
Alert Configuration is used to set when Alert Mode is deactivated.
• Clear after 1 report: The SOS message and tracking report are sent one
time when Alert mode is activated. Then Alert Mode is deactivated.
• Clear after alert timeout: The SOS message and tracking report are sent at
the Alert Mode Reporting Interval rate for the duration of the timeout. When
the timeout has expired, Alert Mode is deactivated. The timeout can be set
from 0 to 16 hours.

Tracker

Tracker Status
This shows if the tracker is on or off. You can turn the tracker off by sliding the
button.
To turn the tracker on, you must use the button on the tracker.
You can also enable Stealth Mode on this screen. This mode will turn off any
phone notification sounds (beeps, etc.) and tracker LEDs so you can use your
device discreetly.
Notifications
You can enable or disable the following notifications:
GMPT-401 Personal Tracker User Guide