Service; Telescopic Suction Hose Locking Piece Replacement; Pushbutton Replacement - Miele S 8310 Descriptive Technical Documentation

DTD no. 41-8000
4

Service

4.1

Telescopic Suction Hose Locking Piece Replacement

Fig. 1: Telescopic Hose Locking Piece
A Release the old locking piece with a small flathead screwdriver.
A Remove the cap (060 Fig. 1, Pos. A). The pushbutton and spring underneath
will be released as well.
A The insert (060 Fig. 1, Pos. B) will also come out when the locking piece is
removed.
A When installing, first insert the pushbutton.
A Press and hold the pushbutton while sliding the insert into the suction hose.
4.2

Pushbutton Replacement

Fig. 2: Pushbutton
A Pry off the old pushbutton with a small flathead screwdriver.
A Place the bar (060 Fig. 2, Pos. 4) in its holder.
A Place the spring (060 Fig. 2, Pos. 1) in its holder.
A Place the pushbutton (060 Fig. 2, Pos. 2) on the bar.
07.06.2013, US_am
Descriptive Technical Documentation
This information should not be duplicated or passed on without Miele approval. All rights reserved.
060-3