Bag Change Indicator Removal; Hinge Socket Wiring Harness Removal - Miele S 8310 Descriptive Technical Documentation

030-4
4.4

Bag Change Indicator Removal

A Dust Channel Assembly Removal, 030 4.3.
A Pull up on the silver dust channel ring to separate it from the dust channel
(the locking latch for the accessory compartment lid may also come off).
A Release the hose end of the indicator (without the orange tab) from its
retainer on the dust channel; pull up to remove the indicator assembly, taking
care not to lose the spring that is inside the hose.
4.5

Hinge Socket Wiring Harness Removal

A Dust Channel Assembly Removal, 030 4.3.
A Pull up on the silver dust channel ring to separate it from the dust channel
(the locking latch for the accessory compartment lid may also come off).
A Release the wiring harness plug closest to the dust channel opening.
A Push the orange tab on the bag change indicator to the right to release the
wires underneath.
A Release the rest of the hinge socket wiring from the dust channel, pulling up
on retaining tabs as necessary.
A Release the other plug from its housing at the other end of the dust channel
assembly.
This information should not be duplicated or passed on without Miele approval. All rights reserved.
Descriptive Technical Documentation
DTD no. 41-8000
07.06.2013, US_am