On/Off Switch Removal; Powerbrush Outlet Wiring Harness Removal; Park Switch Replacement (Model-Dependent) - Miele S 8310 Descriptive Technical Documentation

040-10
4.3

On/Off Switch Removal

A Operating Unit Removal, 040 4.1.
A Turn the operating unit over; release the on/off switch from its retainers on the
operating-unit casing.
A Disconnect the two wires from the on/off switch.
4.4

Powerbrush Outlet Wiring Harness Removal

A Operating Unit Removal, 040 4.1.
A Turn the operating unit over; disconnect the Molex end of the wiring harness
from the electronic.
A Release the wiring harness from its retainers on the operating-unit casing.
A Release the socket end of the wiring harness from its housing on the
operating-unit casing.
4.5

Park Switch Replacement (Model-Dependent)

Fig. 10: Park Switch
A Operating Unit Removal, 040 4.1.
A Disconnect and remove the Park switch (040 Fig. 10, Pos. 1).
This information should not be duplicated or passed on without Miele approval. All rights reserved.
Descriptive Technical Documentation
DTD no. 41-8000
07.06.2013, US_am