Fault Repair; Suction Power Too Low - Miele S 8310 Descriptive Technical Documentation

DTD no. 41-8000
3

Fault Repair

3.1

Suction Power Too Low

Cause
Floor nozzle or suction hose is clogged.
Remedy
A Clean the floor nozzle and/or suction hose.
Cause
Dustbag is full.
Remedy
A Change the dustbag.
Note
The dustbag must be changed when the window in the bag change indicator is
completely red or the corresponding LED (model-dependent) lights up.
Cause
Pre-motor filter clogged.
Remedy
A Pre-motor filter exchange.
Note
The pre-motor filter must always be changed when a new packet of Miele
dustbags is opened. Each package of Miele dustbags contains a pre-motor filter.
Cause
Exhaust filter clogged.
Remedy
A Change the exhaust filter.
07.06.2013, US_am
Descriptive Technical Documentation
This information should not be duplicated or passed on without Miele approval. All rights reserved.
050-3