Function; Thermal Protection Function - Miele S 8310 Descriptive Technical Documentation

050-2
2

Function

2.1

Thermal Protection Function

Fig. 1: Thermal Limiter F2 (Taken from Wiring Diagram)
Temperature limiter F2 (050 Fig. 1) is integrated into the motor winding and will
interrupt power if the motor should overheat. For some models this will also be
indicated via an indicator light on the operating unit. The temperature limiter will
reset itself after the motor cools down (approx. 30 minutes). This component is
part of the motor assembly and cannot be replaced individually.
This information should not be duplicated or passed on without Miele approval. All rights reserved.
Descriptive Technical Documentation
DTD no. 41-8000
07.06.2013, US_am