Miele S 8310 Descriptive Technical Documentation page 26

040-8
4 Service
4.1 Operating Unit Removal
A Dust Channel Assembly Removal, 030 4.3.
A Take out the exhaust filter frame (and filter).
A Cover Frame Removal, 020 4.2.
Warning!
To avoid damaging the lacquered surface, do not lever out the foot switch with
sharp tools (screwdriver, etc.).
A Carefully lever out the two foot switches with a lid opener (mat. no. 05012752)
(040 Fig. 8).
Fig. 8: Foot Switch Removal
A Remove the three T20 screws (040 Fig. 9, Pos. 1).
A Take out the parking slot trim (it will come out on its own).
A Release the two front clips and one side clip with a small flathead screwdriver
(040 Fig. 9, Pos. 2), and remove the operating unit.
This information should not be duplicated or passed on without Miele approval. All rights reserved.
Descriptive Technical Documentation
DTD no. 41-8000
07.06.2013, US_am