Honeywell 3400 Installation Instructions Manual page 43

10.2.2 Device I.D. Display Screen
To change Device I.D., complete the following steps:
1. Press the MENU button.
2. The following screen will appear:
—> LOAD CONTROL
DATE & TIME
DEVICE ID
IP SETTINGS
3. Use UP or DOWN button until the arrow is on the Device ID line.
LOAD CONTROL
DATE & TIME
—>DEVICE ID
IP SETTINGS
4. Press the SELECT button. The Device ID Screen will appear.
EZ7 ID:1A
MODBUS ID: 2
5. Use UP or DOWN button to make changes, press the SELECT button to
advance to the next setting. Repeat this step until all the settings have been
updated.
6. If changes were made, you'll be asked to save, press UP or DOWN to select Y
or N.
Save changes: Y / N
7. Press SELECT to save new settings. This will also return you to main menu.
In main menu, select EXIT to get out of programming mode and return to
normal display mode.
43
E-MON CLASS 3400 METER
62-0398—02