Honeywell 3400 Installation Instructions Manual page 42

E-MON CLASS 3400 METER
10.2.2 Date & Time Display Screen
To change the date and time, complete the following steps:
1. Press the MENU button.
2. The following screen will appear:
—> LOAD CONTROL
DATE & TIME
DEVICE ID
IP SETTINGS
3. Use UP or DOWN button until the arrow is on the Date and Time line.
LOAD CONTROL
—>DATE & TIME
DEVICE ID
IP SETTINGS
4. Press the SELECT button. The Date and Time Screen will appear, and the 2
digit month will be blinking.
DATE: 02-16-2012
TIME: 01:57:36
5. Use UP or DOWN button to make changes, press the SELECT button to
advance to the next setting. Repeat this step until all the date and time set-
tings have been updated.
6. If changes were made, you'll be asked to save, press UP or DOWN to select Y
or N.
Save changes: Y / N
7. Press SELECT to save new settings. This will also return you to main menu.
In main menu, select EXIT to get out of programming mode and return to
normal display mode.
62-0398—02 42