Place Call From The List Of Contacts; About List Of Contacts - Cisco TelePresence SX10 User Manual

Video Calls

Place Call From the List of Contacts

1
Make sure Call is selected (the leftmost icon
along the bottom of the screen) and press
OK on the remote control or press the
green Call button on the remote control.
4
In the Call menu, press OK or the green
Call button on the remote control to place
the call.
D1509716 User Guide
Cisco TelePresence SX10, SX20
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved.
2
The Contact list appears. Use the Cursor keys
on the remote control to navigate between
Favorites, Recents and Directory (horizontally)
and then down in one of the lists.
5
Press the red End Call button on the
remote control, or use the Cursor keys
to select End Call on the screen and then
press OK to terminate the call.
3
Once an entry has been located, press OK
on the remote control to invoke the Call
menu.

About List of Contacts

Your list of Contacts consists of
three parts:
Favorites. These contacts have
been put there by you. These
entries will typically be someone
you call frequently or otherwise
need to access in a swift and
convenient manner from time to
time. A favorite is denoted by a
golden asterisk
Directory will typically be a
corporate directory installed on your
system by your video support team.
Recents is a list of calls you have
placed, received or missed earlier.
The following options apply:
You may key in a name, number or
•
an IP address and the system will
look in all lists for you.
You may tap a tab and then scroll
•
through the list or key in a name or
number. Your search will then be
restricted to that specific list.
You may add the entry to the list of
•
Favorites; edit aspects of the entry
before calling and/or change the
call rate (the bandwidth applied to
the call).
8