Change The Layout Of The Screen; About Layout - Cisco TelePresence SX10 User Manual

Video Calls

Change the Layout of the Screen

1
Navigate to Layout in the upper right corner and press OK on
the remote control. This icon will appear only when relevant.
D1509716 User Guide
Cisco TelePresence SX10, SX20
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved.
2
Use the Cursor keys to navigate to the new layout you would like to
use and press OK.

About Layout

Whenever you share content or you
are in a video conference, you will
be able to change the layout of the
video shown on the screen.
Your system cannot initiate video
conferences unless certain
infrastructure exists in your
organization. If in doubt, consult your
video support team.
You can, however, be invited to a
video conference by others. The
ability to change the screen layout
will then apply.
Note that the layout change options
offered by the system will depend
on the context and number of
particiapents.
Any changes you make here will not
affect the others.
17