Set The Time And Date - Honeywell HVC0001 Owner's Manual

HVC0001/HVC0002

Set the time and date

Select 24H or 12H Set Hour Set Minutes
The time flashes on the screen when it is
not yet set or after a power outage of
more than 4 hours. To set the clock,
press the main button for 3 seconds to
display the setup menu and proceed as
shown.
Press the main button for 3 seconds at
any time (or do not press any button for
Set Year Set Month
Set Day
60 seconds) to save any changes you
have made and exit the setup menu.
7