Set Date; Daylight; Setting Individual Schedules; Scheduling Example - Honeywell T775R 2000 Series Installation Instructions Manual

MAIN
SCHEDULE
OPTIONS

SET DATE

Fig. 82. Schedule - Options - System Date.
MAIN
SCHEDULE
OPTIONS

DAYLIGHT

Fig. 83. Schedule - Options - Daylight Saving Time.
MENU
SCHEDULE
MON-FRI
Fig. 84. Schedule Event Menu (Showing MON-FRI).

4.3. Setting Individual Schedules

As shown in the Schedule menu (Fig. 79 on page 32),
schedules can be set for the following time periods:
— Monday through Friday
— Saturday and Sunday
— Individual days of the week
1. From the Schedule menu, use the  and  buttons
to highlight the desired time period.
2. Press the  button to display the Schedule menu
for the selected time period.
T775R SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLER
MAIN
SCHEDULE
OPTIONS
SET DATE
01/01/2007
SET
SYSTEM
DATE
M24362
MAIN
SCHEDULE
OPTIONS
DAYLIGHT
YES
NO
USE
DAYLIGHT
SAVING
TIME
M24363
MENU
SCHEDULE
MON-FRI
E1 SETPT
E1 TIME
E2 SETPT

E2 TIME

EXIT
M24364
33
4.2.2. SET DATE
Setting the system date is required to enable the
controller to follow daylight saving time.
IMPORTANT
To properly account for Daylight Saving time, be
sure to set the Date before setting the Time.
1. From the Options menu, use the  and  buttons
to highlight SET DATE.
2. Press the  button to display the current system
date setting.
3. Use the  button to cycle between the month, day,
and year values.
4. Use the  and  buttons to increase/decrease the
desired value for the month, day, and year.
5. Press the  button to accept the Date and return to
the Options menu.
4.2.3. DAYLIGHT
1. From the Options menu, use the  and  buttons
to highlight DAYLIGHT.
2. Press the  button to display the current system
setting for daylight saving time.
3. Use the  and  buttons to select YES or NO.
Default: YES
4. Press the  button to accept the value and return to
the Options menu.
5. From the Options menu, use the Use the  and 
buttons to highlight EXIT.
6. Press the  button to return to the Schedule menu.
Table 5. Mon - Fri Schedule Defaults
DAY EVENT
Mon-Fri Event 1 (E1)
Mon-Fri Event 2 (E2)
Sat-Sun Not used; remains in Setback from
Mon-Fri E2 settings
a
Setpoint time span is 6:00 AM until 5:59 PM because
setback starts at 6:00 PM.
b
Setpoint time span is 6:00 PM until 5:59 AM because
setback starts at 6:00 PM.

SCHEDULING EXAMPLE

Setting the schedule is independent of the temperature
settings for the relay outputs. Table 5 illustrates a weekly
schedule for daytime (setpoint) and night time (setback)
use and shows the factory default settings.
For each selected time period, the schedule event (E1
and E2) parameters are exactly the same as shown in
Fig. 84.
To set a schedule, continue with "4.3.1. E1 SETPT
(setpoint for event 1)" on page 34.
The following figures show the MON-FRI menu, but the
menu selections are the same for any time period.
(daylight saving time)
SETPT ACTION
Setpoint
6:00 AM
Setback
6:00 PM
TIME
a
b
62-0249—13