Dell C9000 Series Reference Manual page 766

unit unit-num
party-bus
pe pe-id
stack-unit unit-
number
rp
sfm sfm-unit-
num
Defaults none
Command Modes EXEC Privilege
• cpu sata-interface statistics: Clears sata-
interface error counter statistics.
Enter the unit unit-num parameters with a command option
to clear hardware statistics for a specified NPU. The range of
NPU numbers is 0 to 3. The command options are:
• counters: Clears the packets counters.
Enter the keyword party-bus with a command option to clear
hardware statistics for the party bus that links the switch CPUs.
The command options are:
• port port-num statistics: Clears statistics on a
specified party-bus internal port.
• port all: Clear statistics on all party-bus internal ports.
Enter the keyword pe with a port extender (PE) ID to clear
hardware statistics for a specified port extender. The PE ID range
is from 0 to 255.
NOTE: The pe option is only visible when the extended
bridge feature is enabled.
Enter the keyword stack-unit with a stack unit number to
clear hardware statistics for a specified stack-unit number. The
stack-unit number range is from 0 to 7.
Enter the keyword rp with a command option to clear hardware
statistics for the Route Processor. The command options are:
• cpu data-plane statistics: Clears data-plane
statistics, including the HiGig port statistics with input/
output counters.
• cpu i2c statistics: Clears active i2c-address
statistics.
• cpu sata-interface statistics: Clears sata-
interface error counter statistics.
Enter the keyword sfm with a Switch Fabric Module (SFM) unit
number and a command option to clear hardware statistics from
the specified SFM. The range of SFM unit numbers is from 0 to 5.
The command options are:
• counters: Clears the traffic counters.
Debugging and Diagnostics 766