Show Ip Bgp Community-List - Dell C9000 Series Reference Manual

BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r
- redistributed
Origin codes: i - IGP, e - EGP, ? - incomplete
Weight Path
*>
0 200 i

show ip bgp community-list

View routes that a specific community list affects.
C9000 Series
Syntax
show ip bgp [vrf vrf-name] [ipv4 {unicast | multicast} | ipv6
unicast] community-list community-list-name [exact-match]
Parameters
vrf vrf-name
ipv4 unicast
ipv4 multicast
ipv6 unicast
community-list-
name
exact-match
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
n - network,
Network
66.0.0.0/24
(OPTIONAL) Enter the keywords vrf and then the name of the
VRF to view routes affected by a specific community list
corresponding to that VRF.
(OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to view information related only to ipv4 multicast
routes.
(OPTIONAL) Enter the keyword ipv6 followed by the keyword
unicast to view information related only to ipv6 unicast routes.
Enter the name of a configured IP community list (maximum
140 characters).
Enter the keyword for an exact match of the communities.
• EXEC
• EXEC Privilege
D - denied, S - stale
Next Hop
172.16.0.2
Metric LocPrf
Border Gateway Protocol 511