desired hedge height and to trim along it, using it as a
reference line.
tool when trimming the hedge straight can avoid cut off
ation. Refer to the section titled "Handle mounting
position".
bottom upwards.
Installing or removing chip receiver
(optional accessory)
CAUTION:
or removing chip receiver.
NOTE:
before installing the chip receiver.
can be installed on either side of the tool.
3
-
1.
2. Chip receiver 3. Nut 4. Shear blade
time, make sure that the chip receiver does not contact
branch catcher at the top of the shear blades.
8 ENGLISH
1
4
2