Russound CAM6.6T-S1 Instruction Manual page 52

INSTALLER
INSTALLATION MENU
9. AUTO PLAY? –
(AtoPl)
10. SAVE CHANGES? –
(Save?)
KEY CONFIG (KeyCf)
Key Configuration defines zone-specific key functions for each source. See Key Config. - Flow Chart
on page 66
1. ZONE NUM –
(Zone#)
2. SOURCE NUM –
(Src #)
3. SELECT A KEY –
(SelKy)
4. KEY TYPE –
(KeyTp)
5. KEY NAME –
(KeyNm)
6. COMMAND TYPE –
(CmdTp)
a. Selected: Learned IR –
(LrnIR)
i. LEARNED SRC –
(LnSrc)
b. Selected: Unassigned
(Unasg)
c. Selected: Default
(Deflt)
d. Selected: Macro:
(Macro)
52
"Yes" tells the CAM6.6 to issue a PLAY command whenever the
source is selected for listening. This option is skipped if the
source type (COMMAND TYPE) chosen does not have a PLAY
command associated with it.
Select "yes" to save changes. Procedure returns to SOURCE
NUM to allow configuration of another source.
Select the zone the key will be configured for. Changes are made
for that zone only; default setting is "All Zones."
Select the source the key will be configured for.
Using or , select the keypad key to be configured.
Either "Key Press," "Key Hold" or "Both" will activate the command.
Name that appears on the keypad display when the command is
activated.
Select the type of source command (e.g., CD, DVD, etc.).
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 8)
The key configuration is cleared. Procedure advances to SAVE
CHANGES (step 9)
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 8)
(To build macros, see Macro Editor page 61)