Table of Contents
Advertisement
USER
INTERNAL SOURCE - AM/FM TUNER
UNO-LRC1 Remote Control
UNO-LRC1 Control of Tuner
Selecting the tuner
To select the tuner, push
source number preassigned to the AM/FM tuner (1),
or use the UNO numeric source inputs at the bottom
of the UNO-LRC1.
Selecting the desired band
Push
to toggle between AM/FM reception.
Selecting the desired frequency
Use the Channel
for manual tuning. To move quickly through the
channels, press and hold the button for more than
1.5 seconds. To directly select a station, enter the
three- or four-digit channel or frequency (1071 for
107.1, etc.). European regions use five-digit station
frequencies.
Frequency Seek
The SEEK function is performed by pressing and
releasing the Select
higher frequency station press
lower frequencies. Tuning begins at the current fre-
quency, seeks upward (or downward) and stops at the
next tuned station. Pushing
tinues the SEEK function. Once the highest frequency
is reached, the tuner continues SEEK mode at the
lowest frequency.
18
and choose the
and
or
and
or
or
. To seek
. Press
or
again con-
Frequency Scan
To scan, press and hold then release
tuner scans through tuned stations with a 5-second
preview before moving to the next station. To end
scanning, press
Selecting a Bank
To select a bank, press and hold
or
for bank down.
Bank/Memory Presets
The AM/FM tuner has six banks of preset memory
settings, and each bank holds six presets for a total
of 36 possible presets.
Memory Preset Programming
1. Select a bank - press and hold
until the desired bank # (1-6) appears on the keypad.
2. Select a station - tune to the desired frequency
with
,
3. Press and hold a # button (1-6) until M(#) SA(ved)
is displayed.
for
Recalling a Memory Preset
Press
and
play of all the configured memory presets for the cur-
rently selected bank.
Mute
Press the
audio output.
again.
for bank up
or
,
or
.
to scroll through a loop dis-
button to mute/unmute the tuner
. The
Advertisement
Table of Contents
