Makita DGA408 Instruction Manual page 11

Installing or removing depressed
Optional accessory
WARNING:
When using a depressed center
on the tool so that the closed side of the guard
always points toward the operator.
CAUTION:
Make sure that the mounting part
result in the dangerous vibration.
the straight part at the bottom of the spindle.
2
3
1. Lock nut 2. Depressed center wheel 3. Inner
4. Mounting part
that the spindle cannot revolve, then use the lock nut
1
2
1. Lock nut wrench 2. Shaft lock
in reverse.
Optional accessory
WARNING:
1. Lock nut 2. Flex wheel 3. Back up pad 4. Inner
1
Follow instructions for depressed center wheel but also
4
accessories page in this manual.
Installing or removing abrasive disc
Optional accessory
NOTE:
1. Sanding lock nut 2.
4.
1.
2. Mount the rubber pad onto the spindle.
3. Fit the disc on the rubber pad and screw the sand-
ing lock nut onto the spindle.
4.
tighten the sanding lock nut clockwise with the lock nut
wrench.
reverse.
11 ENGLISH
Always use supplied guard when
Wheel can shatter during use
1
2
3
4
3. Rubber pad
1
2
3
4
-