RIDGID SeekTech SR-20 Operator's Manual page 62

Main SeekTech
String
Menu Grouping
Identifier
Header Identifier
LCD $SEEKT LCD
62 – English
Data Logging Abbreviations
Data
Description
Abbreviation
DSIG The magnitude of the signal received by the SR‑24�
The number representing the nearness of the target line to the
PROX
SR‑24�
GRAD The gradient offset in pixels�
FUZ The value determining the fuzziness of the line being displayed�
DEP The depth for the target line in millimeters (mm)�
COA The current (mA) or the angle of the signal received by the SR‑24�
The current frequency filter and the type of frequency: narrow
FREQ
band or broadband�
The locating mode (Sonde, Active Line Trace, Passive Power, or
TRAC
Passive Radio Frequency)�
BAT The level of battery remaining in levels (0‑7)�
The line coordinates (x1, y1, x2, y2) in pixels� Sonde pole
LCOR coordinates (Sx, Sy)� Each coordinate is separated by a semi‑
colon�
The different system display states (Attenuator, Clipping, Polar
Angle/Current, Backlight on/off, Feet/Meters, GPS Lock Status, or
Line/Current Suppression based on Depth)�
Bit(s) Description
0
1
2
SYS
3
4
5
6
7‑8
GPSE The estimated GPS position error in meters (m)�
Attenuator State (0=Off, 1=On)
ADC Clipping Status (0=Not Clipping, 1=Clipping)
Polar Angle or Current Value in COA (0=Polar,
1=Current)
Backlight States (0=Off, 1=On)
Feet/Meter State (0=Feet, 1=Meter)
GPS Lock Status (0=No Lock, 1=Lock)
Whether to show Polar Angle or Current (0=Don't
Show, 1=Show)
Sonde Zoom Mode (0=No Zoom, 1=Zoom1,
2=Zoom2)