RIDGID SeekTech SR-20 Operator's Manual page 15

Sonde Mode Display
The display elements shown below appear in Sonde Mode
Pipe Direction
Signal Strength
Currently Set Frequency
Receiver Operation Mode
GPS Estimated
Positional Error
Measured Depth
Zoom Ring
Signal Strength
Currently Set Frequency
Receiver Operation Mode
Sonde Equator
No GPS Signal Lock
Measured Depth
Icon Name
Sonde Mode
Signal Strength
Signal Angle
Measured Depth
Pole
Cross Hairs
Pipe Direction
GPS
Sonde Mode Display Elements
Description
The sonde icon underneath the currently set frequency, indicates the SR‑24 is
set to a sonde frequency�
Strength of the signal detected by the omnidirectional antennas� Observe the
signal strength to determine the maximum signal strength�
The signal angle displays the measured polar angle of the SR‑24 to the sonde
dipole field�
Measured depth shows the approximate depth of the target line� The depth
appears in either meters (m) or feet (ft)�
The pole icon represents the location of a pole of the sonde's dipole field�
The cross hairs are placed at the center of the active view area to represent the
receivers location�
The pipe direction represents the approximate orientation of the sonde's axis�
�
Signal Angle
Battery Status
Backlight
Pole
Bluetooth
SD Card and Usage
Bar Graph
Cross Hairs
Equator Line
Signal Angle
Battery Status
Poles
Equator Line
SD Card and Usage
Bar Graph
Bluetooth
English – 15