Table of Contents System Overview Description ����������������������������������������������������������������������������������������������������������������������������������������������������������������� 3 Blue tooth Specifications ��������������������������������������������������������������������������������������������������������������������������������������������� 3 Range ������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4 Blue tooth Connection Connecting the Devices ���������������������������������������������������������������������������������������������������������������������������������������������� 4 Disconnecting the Devices ����������������������������������������������������������������������������������������������������������������������������������������� 5 Powering the Transmitter �������������������������������������������������������������������������������������������������������������������������������������������� 6 Setting the Frequency ������������������������������������������������������������������������������������������������������������������������������������������������� 6 Transmitter Control Screen ����������������������������������������������������������������������������������������������������������������������������������������� 6 2 –...
This document covers the basics of connecting the de Type Class 1 vices and controlling the transmitter from the receiver� Refer to the operator’s manuals for the RIDGID Seek Profile RFCOMM Tech SR24 and RIDGID Seek Tech ST33Q+ for more...
Blue tooth Connection Range The ST33Q+ and SR24 work best when kept within Connecting the Devices 200 m [656 ft] of each other while connected by Blue tooth� The quality of the connection between devices To connect the devices, follow these steps: may be affected by a number of factors including distan...
Disconnecting the Devices Once a connection is made, the transmitter automatically powers on� When connected, the Blue tooth icon is vi The two devices remain connected until manually discon sible on both the transmitter’s and the receiver’s screens� nected� To disconnect the devices, follow these steps: On the transmitter, a chain link image confirms that the 1�...
Powering the Transmitter Transmitter Control Screen When the two units are connected with Blue tooth, powe When the devices are connected, you can see the trans ring the receiver on or off automatically powers the trans mitter’s screen from the receiver� The transmitter control mitter on or off�...
Page 7
Direct Connect Mode and Inductive Mode Output Power To remotely set the transmitter to direct connect mode or Higher output settings produce a stronger signal for the inductive mode using the receiver, open the transmitter receiver, but reduces battery life for the transmitter� Only control screen�...
Page 8
RIDGID and the RIDGID logo are trademarks of Ridge Tool Company, registered in the U�S� and other countries� All other registered and unregistered trademarks and logos mentioned herein are the property of their respective owners� Mention of thirdparty products is for informational purposes only and constitutes neither an endorsement nor a recommendation�...