Table of Contents System Overview Description ����������������������������������������������������������������������������������������������������������������������������������������������������������������� 3 Bluetooth Specifications ��������������������������������������������������������������������������������������������������������������������������������������������� 3 Range��������������������������������������������������������������������������������������������������������������������������������������������������������������������������4 Bluetooth Connection Syncing the Devices ��������������������������������������������������������������������������������������������������������������������������������������������������� 4 Disconnecting the Devices ����������������������������������������������������������������������������������������������������������������������������������������� 5 Powering the Transmitter �������������������������������������������������������������������������������������������������������������������������������������������� 6 Transmitter Control Screen ����������������������������������������������������������������������������������������������������������������������������������������� 6 2 – English...
This document covers the basics of connecting the de- Type Class 1 vices and controlling the transmitter from the receiv- er� Refer to the operator’s manuals for the RIDGID Profile RFCOMM SeekTech SR-24 and RIDGID SeekTech ST-33Q+ for Transmit power 19 dBm more information on each product’s individual specifica-...
Bluetooth Connection Range The ST-33Q+ and SR-24 work best when kept with- Connecting the Devices in 200 m [656 ft] of each other while connected by Bluetooth� The quality of the connection between devic- To connect the devices, follow these steps: es may be affected by a number of factors including dis- 1�...
Disconnecting the Devices Once a connection is made, the transmitter automatically powers on� When connected, the Bluetooth icon is vis- The two devices remain connected until manually discon- ible on both the transmitter’s and the receiver’s screens� nected� To disconnect the devices, follow these steps: On the transmitter, a chain link image confirms that the 1�...
Powering the Transmitter Transmitter Control Screen When the two units are connected with Bluetooth, pow- When the devices are connected, you can see the trans- ering the receiver on or off automatically powers the mitter’s screen from the receiver� The transmitter control transmitter on or off�...
Page 7
Direct Connect Mode and Inductive Mode Output Power To remotely set the transmitter to direct connect mode Higher output settings produce a stronger signal for the or inductive mode using the receiver, open the transmit- receiver, but reduces battery life for the transmitter� Only use 1,000 mA High Output Mode if using an 18 V Lithi- ter control screen�...
Page 8
RIDGID and the RIDGID logo are trademarks of Ridge Tool Company, registered in the U�S� and other countries� All other registered and unregistered trademarks and logos mentioned herein are the property of their respective owners� Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation�...